|
PLATE Ref. No. | DESCRIPTION | PART NO. | | | | | | | REMARKS |
EC 1 | Crankshaft | A907E0896J | * | | | 1 | | | Up to Engine No. 13276 Inc. - Ensure Spigot Bearing A907E6319F is fitted. |
| Crankshaft, (Cross-Drilled) | A907E0897J | * | * | 1 | | | | From Englre No. 13277 Inc. and all Federal. |
EC 2 | Flywheel | A907E0699K | * | * | 1 | | | | |
EC 3 | Ring Gear | A907E6018ZL | * | * | 1 | | | | |
EC 4 | Dowel, Flywheel/Clutch | A907E6084ZL | * | * | 3 | | | | |
EC 5 | Dowel, Crankshaft/Flywheel | A907E6015ZG | * | * | 2 | | | | |
EC 6 | Bolt, Flywheel | A907E6020ZK | * | * | 1 | | | | |
EC 7 | Spigot Bearing | A907E6049ZA | * | * | 1 | | | | Replaced by A907E6319F, Bulletin 1978/07 |
| Spigot Bearing | A907E6319F | * | * | 1 | | | | See Bulletin 1978/07 |
| Spigot Bearing Thrust Washer | A079F4029F | * | * | 1 | | | | See Bulletin 1978/07 |
EC 8 | Main Bearing Shell, Standard I/D | A907E0336ZH | * | * | 10 | | | | O/D Standard-5 off with Cross Drilled Crank. |
| Main Bearing Shell, Standard I/D | A907E1170F | * | * | 5 | | | | O/D Standard - use with Cross Drilled Crank |
| Main Bearing Shell, 0.010" U/S I/D | A907E0538ZK | * | * | 10 | | | | O/D Standard -5 off wlth Cross Drilled Crank |
| Main Bearing Shell, 0.010" U/S I/D | A907E1172F | * | * | 5 | | | | O/D Standard - use with Cross Drilled Crank |
| Main Bearing Shell, 0.020" U/S I/D | A90TE0539ZD | * | * | 10 | | | | O/D Standard -5 off with Cross Drilled Crank |
| Main Bearing Shell, 0.020" U/S I/D | A907E1173F | * | * | 5 | | | | O/D Standard - use with Cross Drilled Crank. |
| Main Bearing Shell, Standard I/D | A907E0675ZD | * | * | 10 | | | | O/D + 0.015" - up to Eng. No. 13276 Inc. |
| Main Bearing Shell, Standard I/D | A907E0675ZD | * | * | 5 | | | | O/D + 0.015" - from Eng. No. 13277 Inc. |
| Main Bearing Shell, Standard I,/D | A907E1171F | * | * | 5 | | | | O/D + 0.015" - from Eng. No. 13277 Inc. |
| Main Bearing Shell, 0.010" U/S I/D | B907E0675ZH | * | * | 10 | | | | O/D + 0.015" - up to Eng. No. 13276 Inc. |
| Main Bearing Shell, 0.020" U/S I/D | C907E0675ZA | * | * | 10 | | | | O/D + 0.015" - up to Eng. No. 13276 Inc. |
EC 9 | Thrust washer, Standard | A907E1000ZB | * | * | 2 | | | | |
| Thrust washer, +0.0025" | A907E1001ZG | * | * | AR | | | | |
| Thrust washer, +0.005" | A907E1002ZA | * | * | AR | | | | |
| Thrust washer, +0.0075" | A907E1003ZF | * | * | AR | | | | |
| Thrust washer, +0.010" | A907EI004ZL | * | * | AR | | | | |
EC 10 | Woodruff Key | A907E6016ZA | * | * | 1 | | | | Pulley to Crankshaft. |
EC 11 | Oil Seal | A907E6010ZD | * | * | 1 | | | | |
EC 12 | Piston and Liner Assy. | A907EO777WJ | * | * | | 4 | 4 | | High Compression, Includes Items EC13 to EC17, Inc. |
| Piston and Liner Assy. | A907E0778WC | * | * | | | | 4 | Low Compression, Includes Items EC13 to EC17, Inc. |
EC 13 | Gudgeon Pin | B907E0405Z | * | * | 4 | | | | |
EC 14 | Circlip | A907E6022Z | * | * | 4 | | | | |
EC 15 | Compression ring, top | A907E0401YA | * | * | 4 | | | | |
EC 16 | Compression ring, Second | A907E0402YF | * | * | 4 | | | | |
EC 17 | Oil Control Ring | A907E0404ZB | * | * | 4 | | | | |
EC 18 | Con Rod Assy. | B907E0714Z | * | * | 4 | | | | Includes Items EC 19 to EC 21, Inc. |
EC 19 | Dowel | A907E0339ZA | * | * | 8 | | | | |
EC 20 | Bolt | A907E0344ZD | * | * | 8 | | | | |
EC 21 | Bush | A907E0357ZC | * | * | 4 | | | | |
EC 22 | Bearing Shell, Standard | A907E0342ZE | * | * | 8 | | | | |
| Bearing Shell, 0.010 U/S | A907E0540ZJ | * | * | AR | | | | |
| Bearing Shell, 0.020 U/S | A907E0541ZC | * | * | AR | | | | |
Not Illus. | "V" Pulley, Crankshaft, Single | A907E1191F | * | * | | 1 | 1 | | Heater Cars. |
Not Illus. | "V" Pulley, Crankshaft, Twin | A907E1192F | * | * | | | | 1 | Heater Cars. |
Not Illus. | "V" Pulley, Crankshaft, Triple | A907E1193F | * | * | 1 | | | | Air Cond. Cars. |
Not Illus. | Washer, Plain | B907E1106FG | * | * | 1 | | | | |
Not Illus. | Washer, Spring | A075W4038ZD | * | * | 1 | | | | |
Not Illus. | Screw, ½" UNF x 1½" | A075W1020ZL | * | * | 1 | | | | |